Description
Bring your headlights back to life with our professional-grade 2K Headlight Restoration Kit. Designed to remove oxidation, yellowing, haze, and UV damage, this complete system restores the original clarity and appearance of faded plastic headlights while delivering protection that goes far beyond traditional headlight restoration products.
Unlike most headlight restoration kits that rely on ceramic sealers, wipes, or temporary coatings that gradually wear away, this kit uses a durable 2K clear coat system to recreate a factory-style protective finish. The result is exceptional gloss, improved optical clarity, and long-lasting protection against future UV damage and environmental exposure.
Whether you're restoring daily drivers, show cars, trucks, SUVs, or performance vehicles, this kit helps improve nighttime visibility while dramatically enhancing the overall appearance of your vehicle.
The True 2K Headlight Restoration Kit includes:
1 - 13oz 2k HS Spray Can Clearcoat
1 - 180cm X 25yds Tape and Drape
1 - Q1 Premium Yellow Masking Tape .75"
1 - 5 pack OptiGrit WetDry 600 Grit 5-1/2" x 9" Waterproof Sanding Sheets
Features & Benefits
-
Removes oxidation, yellowing, cloudiness, and surface damage
-
Restores factory-like clarity and gloss with a professional-grade 2K clear coat
-
More durable than traditional wipe-on sealers and ceramic coatings
-
Helps protect against UV damage and future fading
-
Improves nighttime visibility and headlight performance
-
Suitable for most plastic headlight lenses
-
Complete system for professional-quality results
Why Choose a 2K Headlight Restoration System?
Most headlight restoration products stop at sanding and polishing before applying a temporary protective coating. While these methods can improve appearance initially, the protection often degrades over time, allowing oxidation to return.
Our 2K Headlight Restoration Kit takes restoration a step further by applying a hardened clear coat finish similar in concept to modern automotive paint systems. This creates a durable protective layer that helps maintain clarity, gloss, and protection significantly longer than conventional restoration methods.
Perfect For
-
Oxidized headlights
-
Yellowed headlight lenses
-
Hazy or cloudy headlights
-
Automotive detailers
-
Body shops
-
DIY enthusiasts
-
Vehicle reconditioning professionals
Restore your headlights the right way with a professional-grade solution engineered for results that last—without relying on temporary wipe-on protectants or short-term ceramic sealers.
This kit does not fix moisture inside the headlight housing
How To Use:
Step 1: Clean the Headlight
Wash the headlight lens and surrounding area to remove dirt, bugs, wax, grease, and road grime. Dry completely before masking.
Step 2: Mask Around the Headlight
Use the yellow masking tape to tape around the edges of the headlight. Use the Tape and Drape to cover the bumper, fender, hood, grille, and any nearby painted surfaces. Make sure only the headlight lens is exposed.
Step 3: Wet Sand the Headlight
Soak the 600 grit sandpaper with clean water.
Wet sand the entire headlight lens by hand using even pressure.
Keep the surface wet while sanding.
Sand until the old haze, yellowing, and damaged clear layer are removed.
The lens should look evenly dull and frosted when finished.
Step 4: Rinse and Dry
Rinse the headlight thoroughly with clean water.
Remove all sanding residue with Spray Away or Quick Detailer for best adhesion.
Dry the headlight completely.
Make sure no water is trapped around the edges before spraying clearcoat.
Step 5: Prepare the 2K Clearcoat
Shake the can well before use.
Activate the 2K clearcoat according to the directions on the spray can.
After activation, shake again thoroughly.
Important: Once activated, the clearcoat has a limited use time. Spray both headlights during the same session.
Step 6: Spray the First Coat
Hold the can about 6–8 inches from the headlight.
Apply a light, even first coat across the entire lens.
Do not spray too heavy on the first coat.
Allow the first coat to flash according to the clearcoat can instructions.
Step 7: Spray the Final Coat
Apply a second, wetter coat for gloss and clarity.
Keep your spray passes even and slightly overlapping.
Avoid heavy buildup around the edges.
Apply additional coats only if recommended by the clearcoat can instructions.
Step 8: Let the Clearcoat Cure
Allow the headlights to dry and cure according to the clearcoat can instructions.
Do not touch, wash, or expose the headlights to water until the clearcoat has properly cured.
Step 9: Remove Masking
Once the clearcoat has set, carefully remove the masking tape and Tape and Drape.
Pull tape slowly away from the fresh clear edge.
